Module 6 Study Guide

Lesson 6.1 — Slope-Intercept Form  |  Lesson 6.2 — Point-Slope Form  |  Lesson 6.3 — Standard Form  |  Lesson 6.4 — Transforming Linear Functions  |  Lesson 6.5 — Comparing Linear Functions

Table of Contents

Lesson 6.1 — Slope-Intercept Form

Explore — Graphing a Line from Slope & y-Intercept

Essential Question: How can you represent a linear function in a way that reveals its slope and y-intercept?

Andrew’s Phone Loan

Andrew’s parents pay for a $500 phone. He pays them back $50 each month. x = number of payments (months), y = amount he still owes.

A
When x = 0 (no payments yet), y = 500. The y-intercept is 500.
B
He owes $50 less every month, so the rate of change is −50 per month. The slope is −50.
C
Plot the y-intercept: the point (0, 500).
D
Slope = change in y / change in x = −50 / 1. From (0, 500), count 50 down and 1 right → plot (1, 450).
E
Draw a line through the points.
Amount Andrew Owes0123456789100100200300400500600Time (months)Amount owed ($)−50+1(0, 500) y-intercept(2, 400)(3, 350)(10, 0) paid off!
Reflect 1 — More points
Keep repeating the slope from the last point: 50 down, 1 right → (2, 400), (3, 350), (4, 300)…
Reflect 2 — When is it paid off?
Paid off means y = 0. $500 ÷ $50 = 10 months. The line hits the x-axis at (10, 0).

Slope-Intercept Form: y = mx + b

Slope-Intercept Form

y = mx + b

m = slope (rate of change)   |   b = y-intercept (starting value), the point (0, b)

Where it comes from (slope formula)

Start with the slope formula and use the y-intercept (0, b) as one point and any point (x, y) as the other:

StepWhy
m = (y − b) / (x − 0)Substitute (0, b) and (x, y)
m = (y − b) / xx − 0 = x
mx = y − bMultiply both sides by x
mx + b = yAdd b to both sides
y = mx + bFlip sides

Read m and b straight off the equation

EquationSlope my-intercept b
y = 3x + 737
y = −2x + 5−25
y = 4x − 94−9 (minus sign goes with b)
y = −x + 2−12
y = ⅔x⅔0 (passes through origin)
y = 60 (horizontal)6
Why it’s useful
You can see the slope and starting value immediately, graph quickly (plot b, then count the slope), and plug in x to make predictions.
Disadvantage: it can’t show vertical lines, and you have to do algebra to get there from Ax + By = C.

Writing Equations in Slope-Intercept Form

Goal: find m and b, then write y = mx + b.

Case 1: Given slope and one point — Example: slope 3, point (2, 5)

1
Write the form: y = mx + b
2
Substitute m = 3, x = 2, y = 5: 5 = 3(2) + b
3
Multiply: 5 = 6 + b
4
Subtract 6: −1 = b
5
Write it: y = 3x − 1

Case 2: Given two points — Example: (0, 5) and (2, 13)

1
Find slope: m = (13 − 5) / (2 − 0) = 8 / 2 = 4
2
Plug m and either point into y = mx + b: 5 = 4(0) + b → b = 5
3
Write it: y = 4x + 5

Shortcut: if one point has x = 0, its y-value is b.

Your Turn

#3: Slope −1, point (3, 2)
2 = −1(3) + b → 2 = −3 + b → b = 5
y = −x + 5
#4: Through (1, 4) and (3, 18)
m = (18 − 4)/(3 − 1) = 14/2 = 7
4 = 7(1) + b → b = −3
y = 7x − 3
Check your answer
Plug the given point(s) back in. For y = 7x − 3 and (3, 18): 7(3) − 3 = 21 − 3 = 18 ✓

Graphing from Slope-Intercept Form

3 Steps
1
Plot the y-intercept (0, b).
2
Write the slope as a fraction rise/run. Count rise (up if +, down if −), then run (always right). Plot a second point.
3
Draw a line through the points.

Example: y = 5x − 4

m = 5 = 5⁄1, b = −4

1
Plot (0, −4).
2
Count 5 up, 1 right → (1, 1).
3
Draw the line.
Whole-number slope
Put it over 1: 5 = 5/1, −2 = −2/1.
y = 5x − 4-4-3-2-11234-4-3-2-11234xy+5+1(0, −4)(1, 1)

Converting Ax + By = C to y = mx + b

Solve for y: move the x-term to the right side, then divide every term by y’s coefficient.

Example: 2x + 6y = 6

1
2x + 6y = 6
2
Subtract 2x: 6y = −2x + 6
3
Divide every term by 6: y = −⅓x + 1

Slope = −⅓, y-intercept = 1.

Graph: plot (0, 1). Move 1 down, 3 right → (3, 0).

y = −⅓x + 1-4-3-2-11234-4-3-2-11234xy−1+3(0, 1)(3, 0)

Your Turn

Standard formWorkSlope-interceptmb
#5: 2x + y = 4subtract 2xy = −2x + 4−24
#6: 2x + 3y = 63y = −2x + 6, ÷ 3y = −⅔x + 2−⅔2
#5: y = −2x + 4-4-3-2-11234-4-3-2-11234xy−2+1(0, 4)(1, 2)
#6: y = −⅔x + 2-4-3-2-11234-4-3-2-11234xy−2+3(0, 2)(3, 0)
Watch the signs
3x − 6y = −12 → −6y = −3x − 12 → divide by −6 (both terms flip sign!) → y = ½x + 2

Real-World Problems

Given a situation (words, table, or graph), find:

MeansLook for
m (slope)rate of change“per mile”, “each month”, “every hour”, “rate”
b (y-intercept)starting value (when x = 0)“initial”, “fee”, “signing bonus”, “starts with”, “already”

Example A: Taxi

Initial charge $2.50, plus $0.35 per mile. Cost of a 10-mile ride?

  • m = 0.35 (dollars per mile)
  • b = 2.50 (cost at 0 miles)
  • y = 0.35x + 2.50
  • x = 10: y = 0.35(10) + 2.50 = 3.50 + 2.50 = $6

(10, 6) is a solution: 10 miles costs $6.

Reflect 7
If the cost per mile goes up, m gets bigger and the line gets steeper. If it goes down, the line gets flatter. The y-intercept stays at 2.50.
Taxi: y = 0.35x + 2.5002468101201234567Distance (miles)Cost ($)(0, 2.50)(10, 6)

Example B: Chairlift (from a graph)

The graph passes through (0, 5400) and (4, 2400). Height after 2 minutes?

  • m = (2400 − 5400) / (4 − 0) = −3000 / 4 = −750: the chairlift descends 750 ft per minute
  • b = 5400: height at 0 minutes (the top)
  • y = −750x + 5400
  • x = 2: y = −750(2) + 5400 = −1500 + 5400 = 3900 ft
Height of a Chairlift012345678901200240036004800Time (min)Height (ft)(0, 5400)(2, 3900)(4, 2400)

Example C: Membership (from a table) — Your Turn #8

MonthsCost ($)
0100
3277
6454
  • m = (277 − 100) / (3 − 0) = 177 / 3 = 59: $59 per month
  • b = 100: initial membership fee (cost at 0 months)
  • C = 59m + 100
  • 4 months: 59(4) + 100 = 236 + 100 = $336
Membership Cost0123456780100200300400500600Time (months)Cost ($)(0, 100)(3, 277)(4, 336)(6, 454)

Common Mistakes

Swapping m and b (Homework #26)
John has $2 and makes $107 per day. A student wrote y = 2x + 107. Wrong: the rate ($107/day) is the slope and the starting amount ($2) is b. Correct: y = 107x + 2.
Losing the minus sign
In y = 4x − 9, b = −9, not 9. In y = −x + 2, m = −1.
Only dividing one term
6y = −2x + 6 → divide both terms by 6: y = −⅓x + 1 (not y = −2x + 1).
Counting run first or the wrong way
Slope −2/3: from the y-intercept go 2 down, then 3 right. Run is always to the right; the sign tells you up or down.
Sign errors when plugging in negatives
m = −⅔, point (−6, −5): −5 = (−⅔)(−6) + b → −5 = +4 + b → b = −9. Negative × negative = positive.

Can every line be written in slope-intercept form? (Homework #27)

No. A vertical line like x = 3 has undefined slope (run = 0) and usually no y-intercept, so there’s no m or b to use.

Every non-vertical line can be written as y = mx + b. Horizontal lines are fine: y = 6 is y = 0x + 6.

x = 3 (vertical)-4-3-2-11234-4-3-2-11234xy

Homework Practice with Solutions

Try each one first, then click to check.

Find slope and y-intercept from a situation

#1: $500 signing bonus, then $200 a day
m = 200 ($ per day), b = 500 (bonus at day 0). y = 200x + 500
#3: Truck rental $20 plus $0.25 per mile
m = 0.25 ($ per mile), b = 20. y = 0.25x + 20

Write the equation (slope + point)

#5: Slope 3, point (1, 5)
5 = 3(1) + b → b = 2 → y = 3x + 2
#9: Slope −⅔, point (−6, −5)
−5 = (−⅔)(−6) + b → −5 = 4 + b → b = −9 → y = −⅔x − 9

Write the equation (two points)

#11: Through (5, 7) and (3, 1)
m = (1 − 7)/(3 − 5) = −6/−2 = 3
7 = 3(5) + b → b = −8 → y = 3x − 8
#12: Through (−6, 10) and (−3, −2)
m = (−2 − 10)/(−3 − (−6)) = −12/3 = −4
10 = −4(−6) + b → 10 = 24 + b → b = −14 → y = −4x − 14

Convert to slope-intercept form

#19: −4x + 2y = 10
Add 4x: 2y = 4x + 10. Divide by 2: y = 2x + 5. m = 2, b = 5
#20: 3x − 6y = −12
Subtract 3x: −6y = −3x − 12. Divide by −6: y = ½x + 2. m = ½, b = 2

Word problems

#23: Skating lessons $25 each + $30 registration. 6 lessons with a $200 gift certificate?
y = 25x + 30. x = 6: 25(6) + 30 = 150 + 30 = $180.
Yes, $180 ≤ $200, with $20 left.
#25: Jake reads 168 pages at 24/day. Julio reads 180 pages at 1¼ × Jake’s rate. Who has more left after 5 days?
Jake: y = −24x + 168 → −24(5) + 168 = 48 pages left
Julio: rate = 1.25 × 24 = 30/day → y = −30x + 180 → −150 + 180 = 30 pages left
Jake has 18 more pages left.
Lesson 6.2 — Point-Slope Form

Explore — Deriving Point-Slope Form

Essential Question: How can you represent a linear function in a way that reveals its slope and a point on its graph?

A line has slope m = 4 and passes through (2, 1). Let (x, y) be any other point on the line.

StepWhy
m = (y₂ − y₁) / (x₂ − x₁)Slope formula
4 = (y − 1) / (x − 2)Substitute m = 4, (2, 1), and (x, y)
4(x − 2) = (y − 1)/(x − 2) · (x − 2)Multiply both sides by (x − 2) to clear the fraction
4(x − 2) = y − 1Simplify
y − 1 = 4(x − 2)Flip sides → point-slope form
-2-11234-112345xy+1+4(2, 1)(3, 5)
y − 1 = 4(x − 2): start at (2, 1), go 4 up, 1 right
Reflect 1 — Rewrite y = 2x + 1 in point-slope form
Pick any point on the line. The y-intercept is easiest: (0, 1) → y − 1 = 2(x − 0).
Another point works too: x = 1 gives y = 3, so (1, 3) → y − 3 = 2(x − 1). Same line, different equation.

Point-Slope Form: y − y₁ = m(x − x₁)

Point-Slope Form

y − y₁ = m(x − x₁)

m = slope   |   (x₁, y₁) = any point on the line. x and y stay as letters.

Read the slope and point straight off the equation

The form has minus signs built in, so the point’s coordinates are the opposite of the signs you see.

EquationRewrite with minus signsSlope mPoint (x₁, y₁)
y − 4 = 3(x − 2)already there3(2, 4)
y + 1 = 7(x + 2)y − (−1) = 7(x − (−2))7(−2, −1)
y − 5 = −2(x + 3)y − 5 = −2(x − (−3))−2(−3, 5)
y + 6 = ½xy − (−6) = ½(x − 0)½(0, −6)
y − 3 = 0(x − 8)simplifies to y = 30 (horizontal)(8, 3)

Example 1: Write the equation given slope and a point

A — Slope 3.5, point (−3, 2)
1
y − y₁ = m(x − x₁)
2
Substitute: y − 2 = 3.5(x − (−3))
3
Simplify: y − 2 = 3.5(x + 3)
B — Slope 0, point (−2, −1)
1
y − y₁ = m(x − x₁)
2
Substitute: y − (−1) = 0(x − (−2))
3
Simplify: y + 1 = 0 → y = −1
Reflect 2 — Slope is 0. What else do you need?
Only the y-coordinate of one point. A slope-0 line is horizontal, so every point has the same y-value. If y₁ = −1, the line is y = −1 no matter what x₁ is.

Your Turn

#3: Slope 6, point (1, 2)
y − 2 = 6(x − 1)
#4: Slope ⅓, point (−3, 1)
y − 1 = ⅓(x − (−3)) → y − 1 = ⅓(x + 3)

Real-World Models: Slope + a Point

Use point-slope form when you know a rate and one data point that is not the starting value. No need to find b first.

Example 2A: Newspaper ad

$10 for the first 2 lines, $3 for each extra line. Cost of an 8-line ad?

1
x = lines, y = cost. 2 lines cost $10 → point (2, 10). $3 per line → m = 3.
2
y − 10 = 3(x − 2)
3
x = 8: y − 10 = 3(8 − 2) = 18
4
y = 28 → $28

Example 2B: A different paper

$15 for 3 lines, $2 for every extra line. Cost of an 8-line ad?

1
Point (3, 15), m = 2: y − 15 = 2(x − 3)
2
x = 8: y − 15 = 2(8 − 3) = 10
3
y = 25 → $25 (cheaper than $28)
Reflect 5 — What does (8, 18) mean?
If 8 lines cost $18 in another paper, (8, 18) is a solution of that paper’s equation and a point on its graph.

Your Turn

#6: Gym signup fee + $11/month. After 4 months Daisy paid $59. Signup fee?
Point (4, 59), m = 11: y − 59 = 11(x − 4)
Signup fee = cost at x = 0: y − 59 = 11(0 − 4) = −44 → y = 15
Signup fee = $15

Writing Point-Slope Equations from Two Points

2 Steps
1
Find the slope: m = (y₂ − y₁) / (x₂ − x₁)
2
Plug m and either point into y − y₁ = m(x − x₁)

Example 3A: (2, 1) and (3, 4)

m = (4 − 1) / (3 − 2) = 3 / 1 = 3

Using (2, 1)Using (3, 4)
y − 1 = 3(x − 2)y − 4 = 3(x − 3)

Both are correct. A line has many point-slope equations, one for every point on it.

-2-11234-112345xy+1+3(2, 1)(3, 4)
Either point works: same line

Example 3B: (1, 3) and (2, 3)

m = (3 − 3) / (2 − 1) = 0 / 1 = 0

Using (1, 3)Using (2, 3)
y − 3 = 0(x − 1)y − 3 = 0(x − 2)

Both simplify to y = 3 (horizontal line).

-11234-11234xy(1, 3)(2, 3)
Reflect 7 — Showing two different-looking equations are the same line
Rewrite both in slope-intercept form. y − 1 = 3(x − 2) → y = 3x − 6 + 1 = 3x − 5. y − 4 = 3(x − 3) → y = 3x − 9 + 4 = 3x − 5. Same equation ✓
Or check that both points make both equations true.

Converting point-slope → slope-intercept

1
Distribute: y − 4 = −2(x + 3) → y − 4 = −2x − 6
2
Add 4 to both sides: y = −2x − 2

Your Turn

#8: (2, 4) and (3, 1)
m = (1 − 4)/(3 − 2) = −3/1 = −3
y − 4 = −3(x − 2) or y − 1 = −3(x − 3)
#9: (0, 1) and (1, 1)
m = (1 − 1)/(1 − 0) = 0
y − 1 = 0(x − 0) or y − 1 = 0(x − 1) → y = 1

Real-World Models: Two Points

When a problem gives two data pairs (words, table, or graph): find the slope, write point-slope form, plug in the x you care about.

Example 4: Animal shelter volunteers

VolunteerWeeksHours
Joan615
Miguel1023
Lili24?
1
Points (6, 15) and (10, 23). m = (23 − 15)/(10 − 6) = 8/4 = 2 hours per week
2
y − 15 = 2(x − 6)
3
x = 24: y − 15 = 2(24 − 6) = 2(18) = 36
4
y = 51 → Lili volunteers 51 hours
Shelter Volunteer Hours05101520250102030405060Weeks workedHours workedJoan (6, 15)Miguel (10, 23)Lili (24, 51)
Justify and Evaluate
Using Miguel’s point instead: y − 23 = 2(24 − 10) = 28 → y = 51 ✓. Makes sense: Lili works 14 more weeks than Miguel at 2 hours/week → 23 + 28 = 51.
The training session: at x = 0, y − 15 = 2(−6) → y = 3 hours.

Your Turn

#10: Gas loyalty program, (5, 10) and (18, 49). Cost of 22 gallons?
m = (49 − 10)/(18 − 5) = 39/13 = 3 ($/gal)
y − 10 = 3(x − 5)
x = 22: y − 10 = 3(17) = 51 → $61
#11: Skating party: 10 skaters $107, 15 skaters $137. Cost for 12?
m = (137 − 107)/(15 − 10) = 30/5 = 6 ($/skater)
y − 107 = 6(x − 10)
x = 12: y − 107 = 6(2) = 12 → $119
Gas Loyalty Program04812162024010203040506070Amount (gal)Cost ($)(5, 10)(18, 49)(22, 61)
#10 — green point is the answer (22, 61)

Slope-Intercept vs. Point-Slope

Slope-InterceptPoint-Slope
Formy = mx + by − y₁ = m(x − x₁)
Showsslope + y-interceptslope + any point
How many per line?exactly oneinfinitely many (one per point)
Best when you knowthe starting value (x = 0)a rate and a point that isn’t the start, or two points
Vertical lines?nono (slope undefined)
Bothshow the slope m, describe the same non-vertical lines, and convert into each other by distributing / solving for y
Elaborate 12 & 14
#12: You can write a point-slope equation through any two points unless they have the same x-value (vertical line, slope undefined).
#14: From a graph: pick two points you can read exactly, find the slope, then plug the slope and one point into y − y₁ = m(x − x₁).

Common Mistakes (6.2)

Sign of the point
Point (−3, 5): y − 5 = m(x − (−3)) = y − 5 = m(x + 3). Reading back: y + 1 = 7(x + 2) uses the point (−2, −1), not (2, 1).
Swapping x and y (Homework #22, Carlota)
Line through (−1, 3) and (2, 9): m = 6/3 = 2 ✓. She wrote y + 1 = 2(x − 3), which uses the point (3, −1). She swapped the x- and y-coordinates. Correct: y − 3 = 2(x + 1) or y − 9 = 2(x − 2).
Mixing up which number goes with x
x₁ goes inside the parentheses with x. y₁ goes with y. For (4, 7): y − 7 = m(x − 4).
Distributing to only one term
y − 4 = −2(x + 3) → y − 4 = −2x − 6 (not −2x + 3).
Using the wrong x-value in word problems
Ad problem: x is the total number of lines (8), not the extra lines (6). The “− 2” in (x − 2) already subtracts the first 2.

None or infinitely many, never exactly one (Homework #23)

A vertical line has undefined slope, so it has no point-slope equation. Any other line has a slope and infinitely many points, and each point gives a different equation: infinitely many. Since a line can’t have just one point, it can’t have exactly one equation.

Lesson 6.2 Homework Practice with Solutions

Try each one first, then click to check. Point-slope answers can use either point; the ones shown are one correct choice.

Point-slope form basics

#1: Is y + 1 = 7(x + 2) in point-slope form?
Yes. It is y − (−1) = 7(x − (−2)): slope 7, point (−2, −1).
#2: Slope 1, point (−2, −1)
y + 1 = 1(x + 2)
#3: Slope −2, point (1, 1)
y − 1 = −2(x − 1)
#4: Slope 0, point (1, 2)
y − 2 = 0(x − 1) → y = 2
#5: Slope ¼, point (1, 2)
y − 2 = ¼(x − 1)

Two points

#6: (1, 6) and (2, 3)
m = (3 − 6)/(2 − 1) = −3 → y − 6 = −3(x − 1)
#7: (−1, 1) and (1, −1)
m = (−1 − 1)/(1 − (−1)) = −2/2 = −1 → y − 1 = −1(x + 1)
#8: (7, 7) and (−3, 7)
m = (7 − 7)/(−3 − 7) = 0/−10 = 0 → y − 7 = 0(x − 7) → y = 7
#9: (0, 3) and (2, 4)
m = (4 − 3)/(2 − 0) = ½ → y − 3 = ½(x − 0)

Word problems

#10: Oil tank (0, 3), (10, 5), (15, 6). Depth after half an hour?
m = (5 − 3)/(10 − 0) = 0.2 ft/min. y − 3 = 0.2(x − 0)
Half hour = 30 min: y − 3 = 0.2(30) = 6 → 9 ft
#11: James: $200 fixed + $20 per mile. Amount for 5 miles?
y − 200 = 20(x − 0)
x = 5: y − 200 = 100 → $300
#12: Keisha: 325 pages at 25 pages/day. Done in 10 days?
y = pages read: y − 0 = 25(x − 0)
x = 10: y = 250. 250 < 325 → No. (She needs 325 ÷ 25 = 13 days.)
#13: Lizzy: 5 tiles after day 1, 35 tiles after day 4. Days for 100 tiles?
Points (1, 5) and (4, 35): m = 30/3 = 10 tiles/day. y − 5 = 10(x − 1)
y = 100: 95 = 10(x − 1) → x − 1 = 9.5 → x = 10.5 days (she finishes during day 11)
#14: Clipper ship water (1, 3555), (8, 3240), (15, 2925). Water left at 50 days?
m = (3240 − 3555)/(8 − 1) = −315/7 = −45 gal/day. y − 3555 = −45(x − 1)
x = 50: y − 3555 = −45(49) = −2205 → 1350 gal
#15: Boiling point: 210°F at 1000 ft, 206°F at 3000 ft. At 6000 ft?
m = (206 − 210)/(3000 − 1000) = −4/2000 = −0.002 °F/ft. y − 210 = −0.002(x − 1000)
x = 6000: y − 210 = −0.002(5000) = −10 → 200°F
#16: Tico’s painting (3, 175) and (8, 400). Area after 5 days?
0123456789100100200300400500Days since rate increaseArea (cm²)(3, 175)(8, 400)(5, 265)
m = (400 − 175)/(8 − 3) = 225/5 = 45 cm²/day. y − 175 = 45(x − 3)
x = 5: y − 175 = 45(2) = 90 → 265 cm²
#17: Balloon 120 ft/min; 2150 ft at 1.5 min, 2330 ft at 3 min. 2500 ft by 4 min?
y − 2150 = 120(x − 1.5) (check: 120(1.5) = 180, 2150 + 180 = 2330 ✓)
x = 4: y − 2150 = 120(2.5) = 300 → y = 2450. No, 2450 < 2500.
#18: Candle 11.2 in at 32 min, 10.75 in 18 min later. Height at 2 hours?
Points (32, 11.2) and (50, 10.75): m = −0.45/18 = −0.025 in/min. y − 11.2 = −0.025(x − 32)
2 hours = 120 min: y − 11.2 = −0.025(88) = −2.2 → 9 in
#19: Pool holds 2160 ft³, fills at 20 ft³/min, already has 1200 gallons. Time to fill?
Convert first: 1200 gal ÷ 7.5 = 160 ft³ already in.
y − 160 = 20(x − 0)
y = 2160: 2000 = 20x → x = 100 minutes
#20: Marisa: 12 blocks away, then 8 blocks away 6 minutes later
a. Assume she walks at a constant speed.
b. x = minutes since first look, y = blocks from Sanjay’s. Points (0, 12): at the first look she is 12 blocks away; (6, 8): 6 min later she is 8 blocks away.
c. m = (8 − 12)/(6 − 0) = −4/6 = −⅔: she gets ⅔ block closer each minute.
d. y − 12 = −⅔(x − 0). Arrive means y = 0: −12 = −⅔x → x = 18 minutes after the first look (12 more after the second look).
#21: Match each equation with its pair of points
EquationPointsWhy
a. y − 10 = 1(x + 2)(−2, 10), (0, 12)point (−2, 10), slope 2/2 = 1
b. y − 0 = 1(x − 0)(1, 1), (−1, −1)y = x, slope 2/2 = 1
c. y − 3 = −1(x + 3)(0, 0), (−1, 1)slope −1, y = −x passes (−3, 3)
d. y − 3 = 0(x − 2)(1, 3), (−3.5, 3)slope 0, y = 3

H.O.T. — Higher Order Thinking

#22: Explain Carlota’s error
Slope is right (m = 2), but y + 1 = 2(x − 3) uses (3, −1). She switched the x- and y-coordinates of (−1, 3). Correct: y − 3 = 2(x + 1) or y − 9 = 2(x − 2).
#23: Why none or infinitely many, but never exactly one?
Vertical line: slope undefined → no equation. Any other line has infinitely many points, and each point gives its own equation → infinitely many. A line always has more than one point, so never exactly one.
#24: Write Ax + By = C (A ≠ 0, B ≠ 0) in point-slope form
Solve for y: y = −(A/B)x + C/B → slope −A/B.
Use the y-intercept (0, C/B): y − C/B = −(A/B)(x − 0)
Or the x-intercept (C/A, 0): y − 0 = −(A/B)(x − C/A)

Lesson Performance Task — Alberto snowboarding

Slope length 1560 ft, vertical drop 600 ft, 24 seconds to the bottom.

a. Height above the bottom at 10 seconds?
x = seconds, y = height above bottom. Points (0, 600) and (24, 0): m = −600/24 = −25 ft/s.
y − 600 = −25(x − 0)
x = 10: y − 600 = −250 → 350 ft
b. Was he going 50 mph?
He travels 1560 ft along the slope (not 600 ft, that’s just the drop) in 24 s: 1560 ÷ 24 = 65 ft/s.
65 ft/s × 3600 s/h ÷ 5280 ft/mi ≈ 44.3 mph. Disagree: about 44 mph, not 50.
Lesson 6.3 — Standard Form

Explore — Comparing Forms of Linear Equations

Essential Question: How can you write a linear equation in standard form given properties of the line including its slope and points on the line?

Standard Form

Ax + By = C

A, B, C are numbers (A and B not both 0). x and y terms on the left, constant on the right.

The same line written three ways:

FormEquation
Standard2x + 3y = −12
Slope-intercepty = −⅔x − 4
Point-slopey + 8 = −⅔(x − 6)
Can you read it directly?Slopey-intercept
StandardFalseFalse
Slope-interceptTrueTrue
Point-slopeTrueFalse

B. Slope = −⅔    D. y-intercept = −4

-6-4-2246-8-6-4-22xy(−6, 0)(0, −4)(6, −8)
2x + 3y = −12: intercepts (−6, 0) and (0, −4); point (6, −8)
Reflect 1 — Both intercepts from standard form
x-intercept: set y = 0 → 2x = −12 → x = −6 → (−6, 0).
y-intercept: set x = 0 → 3y = −12 → y = −4 → (0, −4).
Shortcut: x-intercept = C/A, y-intercept = C/B.
Reflect 2 — A point from slope-intercept form
Pick any x, plug it in, find y. x = 0 gives (0, −4). x = 3: y = −⅔(3) − 4 = −6 → (3, −6).

Rewriting Any Equation in Standard Form

3 Steps
1
Distribute / simplify (point-slope: multiply out the parentheses).
2
If there are fractions, multiply every term by the denominator.
3
Move the x-term to the left with y, move the constant to the right.
StartWorkStandard form
y = 6x − 4subtract 6x: −6x + y = −4, then × −16x − y = 4
y − 2 = −(x + 7)y − 2 = −x − 7 → add x, add 2x + y = −5
y = (4/3)x − ⅔× 3: 3y = 4x − 2 → subtract 3y, add 24x − 3y = 2
y − 4 = (7/3)(x − 3)× 3: 3y − 12 = 7x − 21 → rearrange7x − 3y = 9
Many correct answers
−6x + y = −4 and 6x − y = 4 are the same line (multiply everything by −1). The book often leaves A negative; many teachers prefer A positive and whole numbers. Either is correct unless your teacher says otherwise.

Standard Form from Slope and a Point

Example 1A: Slope 2, point (−2, 2)

Method 1 — Point-slope
1
y − 2 = 2(x − (−2))
2
y − 2 = 2x + 4
3
Subtract 2x, add 2: −2x + y = 6
Method 2 — Slope-intercept
1
2 = 2(−2) + b
2
6 = b → y = 2x + 6
3
Subtract 2x: −2x + y = 6

Example 1B: Slope 5, point (−2, 4)

Method 1 — Point-slope
1
y − 4 = 5(x − (−2))
2
y − 4 = 5x + 10
3
−5x + y = 14
Method 2 — Slope-intercept
1
4 = 5(−2) + b
2
4 = −10 + b → 14 = b → y = 5x + 14
3
−5x + y = 14 (or 5x − y = −14)
Reflect 3 — Which method?
Point-slope skips solving for b, so it’s usually faster. Slope-intercept is nice when you also want the y-intercept. Both land on the same standard form.
Check
Plug the point into your answer: −5(−2) + 4 = 10 + 4 = 14 ✓

Your Turn

#4: Slope −2, point (−7, −10)
y + 10 = −2(x + 7) → y + 10 = −2x − 14
2x + y = −24
Check: 2(−7) + (−10) = −24 ✓
#5: Slope 4, point (−3, 0)
y − 0 = 4(x + 3) → y = 4x + 12
−4x + y = 12 (or 4x − y = −12)

Standard Form from Two Points

3 Steps
1
Find the slope.
2
Plug m and either point into point-slope form.
3
Clear fractions and rearrange to Ax + By = C.

Example 2A: (−2, −1) and (0, 4)

1
m = (4 − (−1)) / (0 − (−2)) = 5/2
2
y − 4 = (5/2)(x − 0) → y − 4 = (5/2)x
3
× 2: 2y − 8 = 5x
4
Rearrange: 5x − 2y = −8

Check (−2, −1): 5(−2) − 2(−1) = −10 + 2 = −8 ✓

-4-3-2-11234-2-1123456xy(−2, −1)(0, 4)
5x − 2y = −8

Example 2B: (5, 2) and (3, −6)

1
m = (−6 − 2) / (3 − 5) = −8 / −2 = 4
2
Using (5, 2): y − 2 = 4(x − 5) → y − 2 = 4x − 20
 
Or (3, −6): y + 6 = 4(x − 3) → y + 6 = 4x − 12
3
Both rearrange to −4x + y = −18 → 4x − y = 18
Reflect 6 — Why either point works
Both points are on the same line with the same slope, so the point-slope equations look different but simplify to the same standard form.

Your Turn

#7: (4, −7) and (2, −3)
m = (−3 − (−7))/(2 − 4) = 4/−2 = −2
y + 7 = −2(x − 4) → y + 7 = −2x + 8
2x + y = 1
#8: (1, 5) and (−10, −6)
m = (−6 − 5)/(−10 − 1) = −11/−11 = 1
y − 5 = 1(x − 1) → y − 5 = x − 1
x − y = −4 (or −x + y = 4)

Real-World Models in Standard Form

Example 3A: Filling a tank

3 gallons already in the tank, fills at 3 gal/min. x = minutes, y = gallons.

1
Point (0, 3), m = 3: y − 3 = 3(x − 0)
2
y − 3 = 3x → 3x − y = −3

Example 3B: Draining a hot tub

440 gallons at the start, 320 gallons after 1.5 hours.

1
Points (0, 440) and (1.5, 320)
2
m = (320 − 440)/(1.5 − 0) = −120/1.5 = −80 gal/hr
3
y − 440 = −80(x − 0) → y − 440 = −80x
4
80x + y = 440

Bonus: empty when y = 0 → 80x = 440 → x = 5.5 hours.

Draining a Hot Tub01234560100200300400500Time (hours)Water (gal)(0, 440)(1.5, 320)(5.5, 0) empty
Reflect 9 — Linear combinations (where standard form shines)
Adult tickets $15, student tickets $4, total $7000. x = adult tickets, y = student tickets:
15x + 4y = 7000
(price × number) + (price × number) = total. This comes out in standard form naturally.

Your Turn

#10: Gas tank had 1.5 gal, fills at 4.5 gal/min
y − 1.5 = 4.5x → 4.5x − y = −1.5
Whole numbers (× 2): 9x − 2y = −3
#11: Pool had 18,000 gal; 12,500 gal left after 2 hours
m = (12500 − 18000)/(2 − 0) = −2750 gal/hr
y − 18000 = −2750x
2750x + y = 18,000

The Three Forms Side by Side

StandardSlope-InterceptPoint-Slope
FormAx + By = Cy = mx + by − y₁ = m(x − x₁)
Slope−A/B (calculate)m (read it)m (read it)
Easy to findboth intercepts (cover-up)y-interceptone point
Vertical linesyes (x = 3 is 1x + 0y = 3)nono
Best forcombinations (tickets, tables), whole-number answersgraphing, starting value + raterate + any data point, two points
Elaborate 12–14
#12: Another method from two points: find m, use slope-intercept to find b, then rearrange y = mx + b into Ax + By = C.
#13: Standard form makes both intercepts easy, models “combination” problems directly, avoids fractions, and can show vertical lines.
#14: You usually write point-slope or slope-intercept first, then rearrange into standard form.

Common Mistakes (6.3)

Dividing by a fraction (Homework #21, Cody)
m = −3 ÷ ⅙. Dividing by ⅙ means multiplying by 6: m = −18, not −½.
Clearing fractions on only one side
y − 4 = (7/3)(x − 3): multiply every term by 3 → 3y − 12 = 7(x − 3), not 3y − 4 = 7(x − 3).
Sign flips when moving terms
y = 6x − 4: moving 6x to the left makes it −6x: −6x + y = −4. Moving a term across the = always changes its sign.
Reading the slope as A
In 2x + 3y = −12 the slope is not 2. Slope = −A/B = −⅔. Solve for y if unsure.

What if A or B is zero? (Homework #22)

CaseEquation becomesLine
A = 0, B ≠ 0By = C → y = C/BHorizontal (slope 0)
B = 0, A ≠ 0Ax = C → x = C/AVertical (slope undefined)
A = 0 and B = 00 = CNot a line, which is why they can’t both be 0

Lesson 6.3 Homework Practice with Solutions

Try each one first, then click to check. Answers are shown with whole numbers; multiplying the whole equation by −1 gives an equally correct answer.

Identify and rewrite

#1: Identify the form of each equation
a. 5x + 4y = 8 → standard
b. y − 3 = 8(x − 2) → point-slope
c. y = 3x + 6 → slope-intercept
d. 2x − 3y = −7 → standard
#2: y = 6x − 4
−6x + y = −4 → 6x − y = 4
#3: y − 2 = −(x + 7)
y − 2 = −x − 7 → x + y = −5
#4: y = (4/3)x − ⅔
× 3: 3y = 4x − 2 → 4x − 3y = 2
#5: y − 4 = (7/3)(x − 3)
× 3: 3y − 12 = 7(x − 3) = 7x − 21 → 7x − 3y = 9
Check (3, 4): 21 − 12 = 9 ✓

Slope and a point

#6: Slope 3, point (1, 4)
y − 4 = 3(x − 1) = 3x − 3 → 3x − y = −1
#7: Slope −2, point (4, 3)
y − 3 = −2(x − 4) = −2x + 8 → 2x + y = 11
#8: Slope −3, point (0, −4)
y = −3x − 4 → 3x + y = −4
#9: Slope 0, point (0, 5)
y = 5 → 0x + y = 5, written y = 5 (A = 0: horizontal line)
#10: Slope (4/7), point (1, 3)
y − 3 = (4/7)(x − 1) → × 7: 7y − 21 = 4x − 4 → 4x − 7y = −17
Check: 4 − 21 = −17 ✓
#11: Slope −(3/2), point (2, 3)
y − 3 = −(3/2)(x − 2) → × 2: 2y − 6 = −3x + 6 → 3x + 2y = 12

Two points

#12: (−1, 1) and (0, 4)
m = 3/1 = 3, b = 4 → y = 3x + 4 → 3x − y = −4
#13: (6, 11) and (5, 9)
m = (9 − 11)/(5 − 6) = 2 → y − 11 = 2x − 12 → 2x − y = 1
#14: (2, −5) and (−1, 1)
m = (1 − (−5))/(−1 − 2) = 6/−3 = −2 → y + 5 = −2x + 4 → 2x + y = −1
#15: (25, 34) and (35, 50)
m = 16/10 = (8/5) → y − 34 = (8/5)(x − 25) → × 5: 5y − 170 = 8x − 200 → 8x − 5y = 30
Check (35, 50): 280 − 250 = 30 ✓
#16: Equation from the graph
Our own graph (the book’s graph didn’t come through).
-4-3-2-11234-2-11234xy(−3, 0)(0, 2)
1. Intercepts: (−3, 0) and (0, 2).
2. m = (2 − 0)/(0 − (−3)) = ⅔, b = 2 → y = ⅔x + 2.
3. × 3: 3y = 2x + 6 → 2x − 3y = −6. Check (−3, 0): −6 − 0 = −6 ✓
Shortcut with intercepts (a, 0) and (0, b): bx + ay = ab → 2x + (−3)y = −6.

Word problems

#17: Tub holds 32 gal, has 12 gal, full after 5 min
Points (0, 12) and (5, 32): m = 20/5 = 4 gal/min
y − 12 = 4x → 4x − y = −12
#18: Oil barrel had 10 gal, fills at 7.5 gal/min
y − 10 = 7.5x → 7.5x − y = −10, or × 2: 15x − 2y = −20
#19: 150 people, large tables seat 10, small tables seat 6
10x + 6y = 150 (or divide by 2: 5x + 3y = 75)
Check (12, 5): 120 + 30 = 150 ✓
Other combinations (whole numbers only): (15, 0), (9, 10), (6, 15), (3, 20), (0, 25)
#20: Match each equation with standard form
EquationWorkStandard form
a. y = ⅔x + 3× 3: 3y = 2x + 92x − 3y = −9
b. 6 − y = −5x + 8add 5x, subtract 65x − y = 2
c. y − 3 = 4(x − 3)y − 3 = 4x − 124x − y = 9
d. −(7/6)x + 1 = y× 6: −7x + 6 = 6y7x + 6y = 6

H.O.T. — Higher Order Thinking

#21: Find Cody’s error: points (½, 4) and (⅔, 1)
Denominator: ⅔ − ½ = ⅙ ✓. Error: −3 ÷ ⅙ = −3 × 6 = −18, not −½.
His later steps were done right for his slope; redo them with m = −18:
y − 1 = −18(x − ⅔) → y − 1 = −18x + 12 → 18x + y = 13
Check (½, 4): 9 + 4 = 13 ✓; (⅔, 1): 12 + 1 = 13 ✓
#22: What if only A = 0? Only B = 0?
Only A = 0: By = C → y = C/B, a horizontal line.
Only B = 0: Ax = C → x = C/A, a vertical line.
Both 0 would give 0 = C, which isn’t a line.

Lesson Performance Task — Airplane fuel

Full tank 40,000 gal, 550 mph. After 8 hours, 14,000 gal left. Another 3.5 hours to land.

Fuel left at landing?
x = hours, y = gallons. Points (0, 40000) and (8, 14000): m = −26000/8 = −3250 gal/hr
Standard form: 3250x + y = 40,000
Total time 8 + 3.5 = 11.5 h: 3250(11.5) + y = 40000 → 37,375 + y = 40,000 → y = 2625 gallons
Total distance of the flight?
550 mph × 11.5 h = 6325 miles
Lesson 6.4 — Transforming Linear Functions

Explore 1 — Translating: Changing b

Essential Question: What are the ways in which you can transform the graph of a linear function?

The Linear Family

f(x) = mx + b

Parent function: f(x) = x (m = 1, b = 0). Every other non-vertical line is a transformation of it (m = 0 flattens it all the way to horizontal).

A. Window after ZStandard → ZSquare: y from −10 to 10; x widens to about −15 to 15 (exact value depends on the calculator model) so the tick marks are evenly spaced.

B. f(x) = x: slope = 1, y-intercept = 0.

C. f(x) = x + 2 and f(x) = x − 3:

  • Same: slope 1, so the lines are parallel (same steepness).
  • Different: y-intercepts (2 and −3), so they sit at different heights.
-4-3-2-11234-4-3-2-11234xy(0, 2)(0, −3)
y = x   y = x + 2 (up 2)   y = x − 3 (down 3)
Reflect 1 — Vertical translation
Increase b → the line slides up. Decrease b → the line slides down. Every point moves the same distance, so the steepness never changes.
Reflect 2 — f(x) + k vs. f(x + k)
For f(x) = x: f(x) + k = x + k and f(x + k) = (x + k) = x + k. Same rule, same graph.
So moving y = x up k looks exactly like moving it left k.

Explore 2 — Stretching, Shrinking, Reflecting: Changing m

StepWhat you graphWhat happens
Am > 1 (2x, 6x)All pass through (0, 0); bigger m = steeper
B0 < m < 1 (0.5x, 0.2x)As m drops toward 0: less steep (flatter)
Cf(x) = −xSlope −1, y-int 0. Reflection of y = x across the y-axis (or x-axis)
Dm < 0m decreasing from −1 (−2, −5): steeper, falling. m increasing from −1 toward 0 (−0.5): less steep
-4-3-2-11234-4-3-2-11234xy
y = x   y = 3x (stretch)   y = ⅓x (shrink)   y = −x (reflect)
Reflect 3 — Stretch or shrink?
m > 1: vertical stretch. Every y-value is multiplied by more than 1, so the line pulls away from the x-axis (steeper).
0 < m < 1: vertical shrink. Every y-value gets smaller, so the line squashes toward the x-axis (flatter).
m < 0: the line is also reflected (it falls left to right).

Steepness = |m|

How m changesEffect on f(x) = mx
|m| gets bigger (farther from 0)Steeper
|m| gets smaller (closer to 0)Less steep
m changes signReflection (rises ↔ falls)

Explore 3 — Function Families & Parameters

TermMeaningLinear example
Family of functionsFunctions whose graphs share basic characteristicsAll graphs are straight lines
Parent functionThe most basic function in the familyf(x) = x
ParameterA constant that picks which family member you havem (slope) and b (y-intercept)
-3-2-1123-3-2-1123xy
Same m = 2, different b: parallel lines
-3-2-1123-3-2-1123xy(0, 1)
Same b = 1, different m: lines all through (0, 1)
Reflect 4
First graph (y = 2x + 2, y = 2x, y = 2x − 1): the unchanged parameter is m = 2, so all three lines have the same slope and are parallel.
Second graph (y = −x + 1, y = x + 1, y = 2x + 1): the unchanged parameter is b = 1, so they all cross the y-axis at (0, 1).

Explain 1 — Parameter Changes in Real-World Models

Gym: $50 one-time fee + $25 per month. C(t) = 25t + 50, t = months.

Change in the storyParameterGraph
A. Lower one-time fee ($25)b: 50 → 25Shifts down, same slope (parallel)
B. Higher monthly fee ($35)m: 25 → 35Steeper, same y-intercept
Translate words into parameters
One-time / starting / flat / base / initial amount → b (y-intercept)
Per month / per hour / per item / rate → m (slope)
Gym Cost01234567050100150200250300Time (months)Total cost ($)
25t + 50 original   25t + 25 lower fee   35t + 50 higher monthly
Reflect 5 — Raise the fee, lower the monthly cost
Move the y-intercept up (higher starting point) and make the line less steep (smaller slope). Example: C(t) = 20t + 75.

Your Turn

#6: The one-time fee is waived
b becomes 0: C(t) = 25t.
The graph shifts down 50, stays parallel (same slope 25), and now starts at the origin (0, 0).
#7: Raise the joining fee, lower the monthly fee: domain? range?
Domain: no change. It’s still the number of months (t ≥ 0), which doesn’t depend on the prices.
Range: changes. The range starts at the new (higher) one-time fee, and the values go up by the new (smaller) monthly amount.

Elaborate

#8: How do changes to m in f(x) = mx affect the graph?
|m| bigger → steeper; |m| closer to 0 → less steep. Compared with y = x: |m| > 1 → vertical stretch; 0 < |m| < 1 → vertical shrink. m negative → reflected, so the line falls. The line always goes through (0, 0).
#9: How do changes to b in f(x) = x + b affect the graph?
The line translates vertically: up when b increases, down when b decreases. The slope doesn’t change.
#10: Which parameter changes the steepness?
m, the slope.
#11: Essential Question: What are the types of transformations?
Translations (shift up/down by changing b), stretches (|m| > 1), shrinks (0 < |m| < 1), and reflections (m changes sign).

Common Mistakes (6.4)

Mixing up which parameter changed (Homework #21)
$20 join → $19 join is b decreasing (shift down). $5/week → $6/week is m increasing (steeper). Match each number to its role before you describe the graph.
“Bigger m” isn’t always steeper
Going from m = −5 to m = −2 increases m but makes the line less steep. Steepness is |m|, the distance from 0.
Changing m moves the x-intercept (Homework #22)
y = 2x + 4 has x-intercept −2. y = 4x + 4 has x-intercept −1. The y-intercept stays at 4, but the x-intercept moves.
Reflect across the y-axis = replace x with −x
f(x) = x − 1 reflected across the y-axis is f(−x) = −x − 1. Only the x-term flips sign. The −1 stays.

Lesson 6.4 Homework Practice with Solutions

Try each one first, then click to check. Questions about graphing two more functions have many right answers; these are examples.

Graph more family members of f(x) = x + 2

In each graph: blue = f(x) = x + 2, green = first answer, amber = second answer.

#1: Change b only
Keep m = 1: f(x) = x + 5 and f(x) = x − 3. Parallel lines with y-intercepts 5 and −3.
-4-224-4-224xy
#2: Change m, with m > 1
Keep b = 2: f(x) = 3x + 2 and f(x) = 5x + 2. Steeper, both through (0, 2).
-4-224-4-224xy(0, 2)
#3: Change m, with 0 < m < 1
f(x) = ½x + 2 and f(x) = ¼x + 2. Flatter, both through (0, 2).
-4-224-4-224xy(0, 2)
#4: Change m, with m < 0
f(x) = −x + 2 and f(x) = −3x + 2. They fall left to right, both through (0, 2).
-4-224-4-224xy(0, 2)

Reading parameters from graphs

#5: Change the parameters of f(x) = x
Our own graph (the book’s graph didn’t come through; same idea, made-up numbers).
a. m increased, b unchanged: g(x) = 2x (steeper, still through (0, 0))
b. m decreased, b unchanged: g(x) = ½x (flatter)
c. m unchanged, b increased: g(x) = x + 3 (parallel, shifted up 3)
d. m unchanged, b decreased: g(x) = x − 4 (parallel, shifted down 4)
-6-4-2246-6-4-2246xy
gray = f(x) = x   a   b   c   d
#6: State m and b for f, g, h (our graph)
Our own graph (the book’s graph didn’t come through; same idea, made-up numbers).
-6-4-2246-6-4-2246xyfgh
Liney-intercept (b)Two grid pointsSlope (m)Rule
f−2(0, −2), (2, 4)6/2 = 3f(x) = 3x − 2
g5(0, 5), (5, 0)−5/5 = −1g(x) = −x + 5
h−4(0, −4), (8, 0)4/8 = ½h(x) = ½x − 4
From the parent f(x) = x: f is a stretch by 3, down 2. g is a reflection, up 5. h is a shrink by ½, down 4.

Describe the transformation from f(x) = x

#7: g(x) = −x + 9
Reflection across the y-axis (m = −1), then translated up 9.
#8: g(x) = 3x
Vertical stretch by a factor of 3 (steeper).
#9: g(x) = ¼x
Vertical shrink by a factor of ¼ (less steep).
#10: g(x) = 7x − 8
Vertical stretch by 7, then translated down 8.
#11: g(x) = −¾x + 5
Reflection + vertical shrink by ¾, then translated up 5.

Write the new function

#12: f(x) = −x + 2, same steepness, opposite direction
Flip the sign of m: g(x) = x + 2
#13: Reflect f(x) = x − 1 across the y-axis, then down 4
Reflect (x → −x): −x − 1. Down 4: −x − 1 − 4 → g(x) = −x − 5

Word problems

#14: Restaurant: f(x) = 15x + 25 → $50 fee, $12/person
f(x) = 12x + 50. The y-intercept rises from 25 to 50 (starts higher), and the slope drops from 15 to 12 (less steep).
#15: Chaperones: f(x) = ¼x + 2
0 parents: f(x) = ¼x, shifted down 2 (through the origin).
1 teacher per 3 students: f(x) = ⅓x + 2, which is steeper (⅓ > ¼), same y-intercept.
#16: Satellite: C(t) = 40t + 75
a. Fee $60: y-intercept 75 → 60, shift down 15, same slope.
b. Monthly $30: slope 40 → 30, less steep, same y-intercept.
c. C(t) = 30t + 60
#17: Salesperson: I(s) = 0.1s + 2000
A. Base salary increased (e.g. to $2200): I(s) = 0.1s + 2200. It’s a parallel line above the original.
01000200030001800200022002400Sales ($)Monthly income ($)
B. Commission rate decreased (e.g. to 5%): I(s) = 0.05s + 2000. It’s less steep and starts at the same point (0, 2000).
01000200030001800200022002400Sales ($)Monthly income ($)
blue = original, green = new
#18: Mr. Resnick: d(t) = 100 − 40t
a. Faster (50 mph): d(t) = 100 − 50t. It falls more steeply from the same start (0, 100) and reaches 0 at 2 h instead of 2.5 h.
0123050100150Time (h)Distance (mi)2.52
b. Detour adds 20 miles: d(t) = 120 − 40t. It’s parallel and starts higher, reaching 0 at 3 h.
0123050100150Time (h)Distance (mi)(0, 120)
c. Example: d(t) = 150 − 50t: 150 = starting miles from the destination, −50 = the distance shrinks 50 miles per hour (driving at 50 mph).
#19: Book club: $20 fee + $12/book
a. y = 12x + 20
b. y = 12x + 30
c. Same slope, so the lines are parallel. B is A translated up 10.
#20: Effect of changing m on steepness
ChangeEffectWhy
A. Increase m when m > 1Steeper|m| grows
B. Decrease m when 0 < m < 1Less steepm moves toward 0
C. Decrease m when m < −1Steepermore negative → |m| grows
D. Increase m when −1 < m < 0Less steepm moves toward 0

H.O.T. — Higher Order Thinking

#21: Explain the error (basketball league)
The student got both backwards. Join cost 20 → 19: b decreased, so the graph shifts down 1. Weekly fee 5 → 6: m increased, so the graph gets steeper. New function: f(x) = 6x + 19.
#22: Geoff vs. Marcus: does changing m affect the intercepts?
Marcus is correct. The y-intercept (b) stays put, but the x-intercept is −b/m, so it changes when m changes (unless b = 0). Example: y = 2x + 4 → x-int −2; y = 4x + 4 → x-int −1.
#23: y = x + 1 vs. y = x + 3, another description
x-intercepts: y = x + 1 → (−1, 0); y = x + 3 → (−3, 0). So y = x + 3 is also a horizontal translation 2 units left of y = x + 1.
#24: y = 3x + 2 and y = 3x − 2: parallel or perpendicular?
Stephanie is correct. They have the same slope (3) and different y-intercepts, so they’re parallel. Perpendicular lines have slopes that multiply to −1 (like 3 and −⅓).
#25: g(x) = x + 3 as a horizontal translation
3 units left: g(x) = f(x + 3) = x + 3. Check: (0, 0) on f moves to (−3, 0), which is on g.

Lesson Performance Task — Car resale value

Year135
Value (%)846444
a. Write the function
m = (64 − 84)/(3 − 1) = −20/2 = −10 per year
84 = −10(1) + b → b = 94
V(t) = −10t + 94
b. Drop the day it was driven off the lot
V(0) = 94%, so it lost 6% right away (100 − 94).
c. Useful after 10 years?
No. V(10) = −10(10) + 94 = −6%, and a car can’t have negative value. The model hits 0 at t = 9.4 years. Real cars lose value more slowly as they get older, so the linear model stops fitting.
d. Months instead of years
Slope becomes −10/12 = −⅚% per month: V(n) = −(5/6)n + 94.
Same y-intercept (94). The slope is 1/12 of the original, so the graph is less steep. It shows the same values, spread over 12× as many units.
Car Resale Value012345678910020406080100YearsValue (%)(1, 84)(3, 64)(5, 44)(0, 94)(9.4, 0)
V(t) = −10t + 94 hits 0% at t = 9.4 years
Lesson 6.5 — Comparing Properties of Linear Functions

Explore — Comparing Algebra and a Description

Essential Question: How can you compare linear functions that are represented in different ways?

The 4 things you compare

Domain (allowed inputs)  |  Range (resulting outputs)  |  Slope (rate of change)  |  y-intercept / initial value

Dan’s Plumbing: D(t) = 35t. Kim’s Plumbing: $35/hour + $40 flat fee → K(t) = 35t + 40.

tD(t) = 35tK(t) = 35t + 40
00 → (0, 0)40 → (0, 40)
135 → (1, 35)75 → (1, 75)
270 → (2, 70)110 → (2, 110)
3105 → (3, 105)145 → (3, 145)

B. Domain: t ≥ 0 for both (time can’t be negative). Range: D(t) ≥ 0; K(t) ≥ 40.

Compare: Same slope (35/hr), so the lines are parallel. Different y-intercepts: Kim always costs $40 more.

Plumbing Cost01234020406080100120140160180Time (h)Cost ($)(0, 40)(3, 105)
D(t) = 35t   K(t) = 35t + 40
Reflect 1
Without changing either form you can already see that both have slope 35 (the hourly rate) and that Kim’s starts $40 higher.

Explain 1 — Comparing Algebra and a Table

Initial value and range on a restricted domain
Initial value = the output at the least input (not always the y-intercept!).
For a linear function on a ≤ x ≤ c, the range is between f(a) and f(c). Write the smaller value first (for a decreasing line, that’s f(c)).

Example 1A (domain 5 ≤ x ≤ 8): table f(x) vs. g(x) = 3x + 7

Initial valueRange
f (table: 20, 24, 28, 32)f(5) = 2020 ≤ f(x) ≤ 32
g(x) = 3x + 7g(5) = 2222 ≤ g(x) ≤ 31

Example 1B (domain 6 ≤ x ≤ 10): table f(x) vs. g(x) = 5x + 11

x678910
f(x)3642485460
1
Least input: 6
2
Initial values: f(6) = 36; g(6) = 5(6) + 11 = 41
3
f(10) = 60 → range 36 ≤ f(x) ≤ 60
4
g(10) = 5(10) + 11 = 61 → range 41 ≤ g(x) ≤ 61

g starts higher (41 > 36) and ends slightly higher (61 > 60).

Reflect 2 — Rate of change from a table
Pick two rows: (change in f(x)) ÷ (change in x). If x goes up by 1 each row, it’s just the difference between outputs.

Your Turn

#3: Rate of change: x 3–7, f(x) 22, 29, 36, 43, 50
(29 − 22)/(4 − 3) = 7
#4: f(x) = 6x vs. g(x) = 5x + 11 on all real numbers
Slopes: f has 6, g has 5, so f is steeper.
y-intercepts: f has 0, g has 11, so g is higher.

Explain 2 — Comparing a Graph and a Description

Example 2A: Rain in Austin vs. Dallas

Austin A(t)Dallas D(t)
RuleA(t) = 4.5tD(t) = 5t (from (0, 0), (4, 20))
Domain0 ≤ t ≤ 3.50 ≤ t ≤ 4
Range0 ≤ A(t) ≤ 15.750 ≤ D(t) ≤ 20
Slope4.5 mm/h5 mm/h (greater)
y-intercept00

Range end for Austin: 4.5 × 3.5 = 15.75.

Rainfall0123402468101214161820Time (h)Rainfall (mm)(3.5, 15.75)(4, 20)
A(t) = 4.5t ends at 3.5 h   D(t) = 5t ends at 4 h

Example 2B: Two groups of hikers

Group 1: 6.5 km/h for 4 hours. Group 2: graph from (0, 0) to (4.5, 36).

f(t)g(t)
Rulef(t) = 6.5tm = (36 − 0)/(4.5 − 0) = 8 → g(t) = 8t
Domain0 ≤ t ≤ 40 ≤ t ≤ 4.5
Range0 ≤ f(t) ≤ 260 ≤ g(t) ≤ 36
Slope6.58 (greater)
y-intercept00

Domains both begin at 0 and end at different values of t. The slope of g(t) is greater than the slope of f(t). The y-intercepts are both 0.

Hikers0123450481216202428323640Time (h)Distance (km)(4, 26)(4.5, 36)
f(t) = 6.5t   g(t) = 8t
Reflect 5 — Meaning of the y-intercepts
A(0) = D(0) = 0: no rain had fallen yet when the storm started.

Your Turn

#6: Plants: f starts 5 cm, grows 0.3 cm/day; g graph (0, 5) to (16, 9)
g: (9 − 5)/(16 − 0) = 4/16 = 0.25 cm/day.
f grows 0.3 cm/day, so f grows faster. Both start at 5 cm.
Plant Heights024681012141618012345678910Time (days)Height (cm)(0, 5)(16, 9) gf

Elaborate

#7: When is a graph more helpful than a table?
When you want the big picture: which line is steeper, where two lines cross, or trends and estimates between and beyond the listed values.
#8: When is a table more helpful than a graph?
When you need exact values, especially fractions or decimals that are hard to read off a grid, and for calculating the rate of change precisely.
#9: Essential Question: Compare a table to a graph
Find the same properties from each: slope (rise/run on the graph, Δy/Δx in the table), y-intercept / initial value, domain, and range (the endpoints). Then compare them side by side.

Common Mistakes (6.5)

Initial value ≠ y-intercept when the domain doesn’t start at 0
g(x) = 3x + 7 on 5 ≤ x ≤ 8: the initial value is g(5) = 22, not 7.
Decreasing functions: range goes low to high
f(x) = −3x + 15 on 0 ≤ x ≤ 4: f(0) = 15, f(4) = 3. Write the range as 3 ≤ f(x) ≤ 15, not 15 ≤ f(x) ≤ 3.
Table rows that skip x-values
x = 0, 50, 100 with outputs 24, 30, 36: slope = 6/50 = 0.12, not 6.
Only the listed values vs. all values in between (Homework #19)
“Only function values shown” means the domain is the list {6, 7, 8}. 6 ≤ x ≤ 8 includes every number in between, like 6.5.

Lesson 6.5 Homework Practice with Solutions

Try each one first, then click to check.

Initial value and range: table vs. rule

#1: 2 ≤ x ≤ 5; f table 5, 7, 9, 11; g(x) = x + 6
f: initial 5, range 5 ≤ f(x) ≤ 11
g: g(2) = 8, g(5) = 11 → initial 8, range 8 ≤ g(x) ≤ 11
g starts higher; both end at 11, so f has the wider range.
#2: 8 ≤ x ≤ 12; f table 34–50; g(x) = 7x − 3
f: initial 34, range 34 ≤ f(x) ≤ 50
g: g(8) = 53, g(12) = 81 → initial 53, range 53 ≤ g(x) ≤ 81
g is greater everywhere and its range is wider.
#3: −4 ≤ x ≤ −1; f(x) = 2x + 9; g table 10, 9, 8, 7
f: f(−4) = 1, f(−1) = 7 → initial 1, range 1 ≤ f(x) ≤ 7
g: initial 10, decreasing → range 7 ≤ g(x) ≤ 10
g starts higher; f increases, g decreases; both reach 7 at x = −1.
#4: 0 ≤ x ≤ 4; f(x) = −3x + 15; g table 23, 19, 15, 11, 7
f: f(0) = 15, f(4) = 3 → initial 15, range 3 ≤ f(x) ≤ 15
g: initial 23, range 7 ≤ g(x) ≤ 23
Both decrease. g starts higher and drops faster (−4 per unit vs. −3).
#5: 10 ≤ x ≤ 13; f table 22, 47/2, 25, 53/2; g(x) = ½x + 12
f: initial 22, range 22 ≤ f(x) ≤ 26.5
g: g(10) = 17, g(13) = 18.5 → initial 17, range 17 ≤ g(x) ≤ 18.5
f is higher and grows faster (1.5 per unit vs. 0.5).
#6: 2 ≤ x ≤ 6; f(x) = −¾x + 10; g table 14, 51/4, 23/2, 41/4, 9
f: f(2) = 8.5, f(6) = 5.5 → initial 8.5, range 5.5 ≤ f(x) ≤ 8.5
g: initial 14, range 9 ≤ g(x) ≤ 14
Both decrease. g is higher and drops faster (−1.25 per unit vs. −0.75).

Rule from a description vs. a graph

The book’s graphs for #7–12 didn’t come through in the text copy, so each one uses our own graph that fits the problem. Read two points off each graph → slope, read the y-intercept, read the domain from the endpoints.

#7: f has slope 6 and y-intercept 20; g is graphed
-88-88xy(0, −8)(4, 8)
g: through (0, −8) and (4, 8) → m = 16/4 = 4. The line runs off both edges of the grid, so its domain is all real numbers.
fg
Rulef(x) = 6x + 20g(x) = 4x − 8
Domainall real numbersall real numbers
Rangeall real numbersall real numbers
Slope64
y-intercept20−8
Same domains and ranges. f is steeper (6 > 4) and has the higher y-intercept (20 > −8).
#8: f has slope −3 and y-intercept 5; g is graphed
-6-4-2246-6-4-2246xy(0, −4)(2, 0)
g: through (0, −4) and (2, 0) → m = 4/2 = 2. The line runs off both edges of the grid, so its domain is all real numbers.
fg
Rulef(x) = −3x + 5g(x) = 2x − 4
Domainall real numbersall real numbers
Rangeall real numbersall real numbers
Slope−32
y-intercept5−4
f falls and g rises. f is steeper (|−3| > 2). f has the higher y-intercept.
#9: Jeff: $32/hour + $25 fee for up to 5.5 hours; Brendan is graphed
Brendan B(t)012345604080120160200240Time (h)Earnings ($)(0, 20)(4, 180)
Brendan: through (0, 20) and (4, 180) → m = 160/4 = 40.
Jeff J(t)Brendan B(t)
RuleJ(t) = 32t + 25B(t) = 40t + 20
Domain0 ≤ t ≤ 5.50 ≤ t ≤ 4
Range25 ≤ J(t) ≤ 20120 ≤ B(t) ≤ 180
Slope3240
y-intercept2520
Brendan charges more per hour ($40 vs. $32). Jeff has the bigger service fee ($25 vs. $20) and the longer job. Jeff’s top value: 32(5.5) + 25 = 201.
#10: Apples: $1.10/lb, up to 10 lb; pears are graphed
Pears p(w)012345678910024681012141618Weight (lb)Cost ($)(9, 13.5)
Pears: through (0, 0) and (9, 13.5) → m = 13.5/9 = 1.5.
Apples a(w)Pears p(w)
Rulea(w) = 1.10wp(w) = 1.5w
Domain0 ≤ w ≤ 100 ≤ w ≤ 9
Range0 ≤ a(w) ≤ 110 ≤ p(w) ≤ 13.5
Slope1.101.5
y-intercept00
Pears cost more per pound. Both start at 0, since 0 lb costs $0. You can buy up to 10 lb of apples but only 9 lb of pears.
#11: Gecko: 19 m/min for 6 min; mouse is graphed
Mouse m(t)0123456789050100150200250300350400450Time (min)Distance (m)(8, 360)
Mouse: through (0, 0) and (8, 360) → m = 360/8 = 45.
Gecko g(t)Mouse m(t)
Ruleg(t) = 19tm(t) = 45t
Domain0 ≤ t ≤ 60 ≤ t ≤ 8
Range0 ≤ g(t) ≤ 1140 ≤ m(t) ≤ 360
Slope1945
y-intercept00
The mouse is faster (45 vs. 19 m/min) and runs longer, so its range is much bigger. Both start at 0 m.
#12: Pump A moves 48 gal/min; Pump B is graphed
Pump B B(t)0246810121416180100200300400500600700800900Time (min)Water pumped (gal)(18, 900)
Pump B: through (0, 0) and (18, 900) → m = 900/18 = 50.
Pump A A(t)Pump B B(t)
RuleA(t) = 48tB(t) = 50t
Domaint ≥ 00 ≤ t ≤ 18
RangeA(t) ≥ 00 ≤ B(t) ≤ 900
Slope4850
y-intercept00
Pump B is faster by 2 gal/min. Cindy should pick Pump B.

Tables and graphs

#13: Rental cars: A(d) = 0.20d; B: $0.10/mi + $10
B(d) = 0.10d + 10
dA(d)B(d)
0010
20412
40814
Alike: both increasing lines, domain d ≥ 0.
Different: A is steeper (0.20 vs. 0.10); B starts at $10, A at $0. They cross at d = 100 miles ($20 each), so A is cheaper under 100 miles and B is cheaper over 100.
02040608010012004812162024Distance (mi)Cost ($)(100, 20) same costAB
#14: Snow: C(t) = 2t + 8; York 8 cm + 1.5 cm/h
Y(t) = 1.5t + 8
tC(t)Y(t)
088
1109.5
21211
Alike: same y-intercept (8 cm at the start).
Different: Carlisle is steeper (2 vs. 1.5 cm/h), so it piles up faster.
01234024681012141618Time (h)Snow depth (cm)(0, 8)CY
#15: Gillian $12.50/h, 20–30 h; Emily e(t) = 13t, 15–25 h
a. Gillian G(t) = 12.5t: domain 20 ≤ t ≤ 30, range 250 ≤ G(t) ≤ 375
Emily: domain 15 ≤ t ≤ 25, range 195 ≤ e(t) ≤ 325
b. Emily has the higher wage ($13 vs. $12.50), but Gillian can work more hours, so her weekly earnings are higher at both the low end ($250 vs. $195) and the high end ($375 vs. $325).
#16: Textbooks: A(p) = 0.13p + 15; B table (0, 24), (50, 30), (100, 36), (150, 42)
B slope: (30 − 24)/(50 − 0) = 0.12 → B(p) = 0.12p + 24
Domain: both whole numbers 1 to 500 (full pages only).
Range: A from $15.13 to $80; B from $24.12 to $84.
Slope: A costs more per page ($0.13 vs. $0.12).
y-intercept: B has the bigger setup cost ($24 vs. $15). A is cheaper for every book up to 500 pages (they’d only be equal at p = 900).
#17: Complete f(x) with slope 4, y-int 7 for x = −2, −1, 0, 1
f(−2) = −1, f(−1) = 3, f(0) = 7, f(1) = 11
The book says to assume the domain includes every real number between −2 and 1, so the range is −1 ≤ f(x) ≤ 11. g(x) = 4x + 7 with that same range has domain −2 ≤ x ≤ 1, so f and g are the same function.
#18: Which functions have a greater rate of change than the graph?
Our own graph (the book’s graph didn’t come through; same idea, made-up numbers).
-6-4-2246-6-4-2246xy(0, −4)(8, 0)
Graph: through (0, −4) and (8, 0) → slope = 4/8 = ½.
a. ½: equal, not greater
b. 1: greater ✓
c. ¾: greater ✓
d. ¼: less
e. 1: greater ✓
Answer: b, c, e. Only the slope matters here; b and e have the same slope even though their y-intercepts differ.
#19: f(x) = 5x + 5 on 6 ≤ x ≤ 8 vs. g table (6, 35), (7, 40), (8, 45)
No. The values match, but g’s domain is only {6, 7, 8}. f’s domain includes every real number from 6 to 8, like 6.5 and 7.25.
#20: f table (−1, −7) … (3, 5) vs. g graph
The book says to assume every real number between the table values is in f’s domain.
Our own graph (the book’s graph didn’t come through; same idea, made-up numbers).
-3-2-112345-7-6-5-4-3-2-112345xy(−1, −7)(3, 5) f(−2, 4) g(3, −1)
f: slope (−4 − (−7))/(0 − (−1)) = 3, y-intercept −4. g: segment from (−2, 4) to (3, −1) → m = −5/5 = −1, y-intercept 2.
fg
Rulef(x) = 3x − 4g(x) = −x + 2
Domain−1 ≤ x ≤ 3−2 ≤ x ≤ 3
Range−7 ≤ f(x) ≤ 5−1 ≤ g(x) ≤ 4
Slope3−1
y-intercept−42
a. g’s domain starts earlier and both end at 3. f’s range is wider (12 units vs. 5).
b. f rises (slope 3) and g falls (slope −1). y-intercepts: −4 and 2.
#21: f(x) = −¼x + 6 (all reals) vs. g graph
Our own graph (the book’s graph didn’t come through; same idea, made-up numbers).
-6-4-2246-6-4-2246xyf(0, −2)(4, 6) g
g: through (0, −2) and (4, 6) → m = 8/4 = 2 → g(x) = 2x − 2 (the line runs off both edges of the grid, so all real numbers).
fg
Rulef(x) = −¼x + 6g(x) = 2x − 2
Domainall real numbersall real numbers
Rangeall real numbersall real numbers
Slope−¼2
y-intercept6−2
a. Same domain and range. b. g is much steeper and rises; f falls gently. f has the higher y-intercept.

H.O.T. — Higher Order Thinking

#22: Least range value not at the least domain value
Any decreasing line. Example: f(x) = −2x + 10 on 0 ≤ x ≤ 5. Initial value f(0) = 10, but the least range value is f(5) = 0.
#23: Same slope, x-intercept, y-intercept: identical?
The rules must be identical: the slope and y-intercept give exactly one y = mx + b. They’re the same function only if they also have the same domain. For example, y = 2x + 1 on 0 ≤ x ≤ 3 and on 0 ≤ x ≤ 10 are different functions.
#24: f slope −3, y-int 0, domain {0, 1, 2, 3} vs. g = {(0, 0), (1, −1), (2, −4), (3, −9)}
f = {(0, 0), (1, −3), (2, −6), (3, −9)}.
Same domain, and they agree at x = 0 and x = 3. But g changes by −1, −3, −5, so it is not linear (g(x) = −x²). Ranges differ: f {0, −3, −6, −9}, g {0, −1, −4, −9}.
#25: f slope 7, y-int −17 on 0 ≤ x ≤ 5 vs. g = {(0, −17), …, (5, 18)}
Every point of g is on f(x) = 7x − 17 (each step is +7). Same rule, but g’s domain is only {0, 1, 2, 3, 4, 5} and its range is {−17, −10, −3, 4, 11, 18}. f’s range is all of −17 ≤ f(x) ≤ 18.

Lesson Performance Task — Lindsay’s pay plans

Plan F: $450 base + 10% commission → f(x) = 0.10x + 450, x ≥ 0, range f(x) ≥ 450, slope 0.10, y-intercept 450.

Plan G and the full comparison (our graph)
Our own graph (the book’s graph didn’t come through; same idea, made-up numbers).
Plan F vs. Plan G01000200030004000500001002003004005006007008009001000Sales ($)Earnings ($)(4000, 850)FG
Plan G: through (0, 250) and (4000, 850) → m = 600/4000 = 0.15 → g(x) = 0.15x + 250 ($250 base + 15% commission).
Plan FPlan G
Rulef(x) = 0.10x + 450g(x) = 0.15x + 250
Domainx ≥ 0x ≥ 0
Rangef(x) ≥ 450g(x) ≥ 250
Slope0.10 (10%)0.15 (15%)
y-intercept450250
Break-even: 0.10x + 450 = 0.15x + 250 → 200 = 0.05x → x = $4000 in sales (both pay $850).
F benefits: higher guaranteed pay ($450) in slow weeks. G benefits: bigger commission, so it pays more once sales top $4000.
Recommendation: if Lindsay expects to sell more than $4000 a week, choose G. If she’s new and unsure, F is the safer choice.